Introduction to the main features of the high-voltage switch
Release time：2021-04-25
Read：83
The high-voltage circuit breaker of the high-voltage switch mechanical characteristic tester is an important control device in the power system. There are the largest number of high-voltage circuit breakers in the power grid, and the operating conditions and technical requirements are more complicated. Its operational reliability is not only related to the high-voltage circuit breaker itself, but also affects other equipment and the entire grid. Therefore, testing the dynamic characteristics of high-voltage circuit breakers is a very important task. However, there are disadvantages such as complicated operation and low test accuracy when using traditional methods to test the dynamic characteristics of high-voltage circuit breakers. In order to solve these problems, the development High-voltage switch dynamic characteristic tester.
The high-voltage switch mechanical characteristic tester has a variety of trigger functions. It can use the input signal to trigger, that is, once there is a signal on the input channel, the acquisition device will automatically trigger to complete the record acquisition function. The external trigger signal is omitted and the synchronization problem between the trigger signal and the measured signal no longer exists. At the same time, its internal trigger pulse width can be programmed and adjusted, which can avoid false triggers caused by interference spikes.
.jpg "hv switch tester")
.jpg "Which transformer tester is better? ＂Exclusive Answer＂")
.jpg "Introduction of Transformer Comprehensive Tester ＂Experienc")
.jpg "Wiring method of relay protection tester ＂Detailed explanat")
+86-13037140838
daixianpeng153@Outlook.com
303 Optics Valley Avenue, Donghu Development Zone, Wuhan City
