The relay protection tester is an instrument often used by electric workers. It has the characteristics of simple use and powerful functions. It is deeply loved by the majority of electric workers. However, many electric workers who use this instrument for the first time are not very clear about how to use this instrument. Equipment, today I will give you a brief introduction to some simple usage methods of the relay protection tester in this article. I hope it will be of some help to those who are using this instrument.

         After inputting the effective value of voltage and current, press "Enter" or click the mouse to another position. The default unit of voltage is V and the unit of current is A. When setting the phase, you can input -180-360° with one key Any angle within the range, if the written angle exceeds the above range, the system will automatically switch to this range, and the effect diagram of the size and direction of each set of communication volume vectors can be observed in real time in the vector diagram window .

         AC voltage single-phase output 120V, when you need to output a higher voltage, you can use any circuit in series, their amplitude values ​​can be different, but the phase is in the opposite direction. If you want to output more current, you can use multiple currents in parallel, and the phase of each phase should be the same when used in parallel. When using large current output, use thicker and shorter wires as much as possible, and the output time should be as short as possible.